Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Rogers Park
Dryer vent cleaning in Rogers Park usually costs $140 – $220 for a single-family home or one unit in a two-flat, and most jobs take under 90 minutes. If your vent runs through an old masonry chimney or an abandoned coal flue, the work costs more because it often requires scoping and, in some cases, re-routing. We work throughout 60626, from the lakefront high-rises near Loyola to the greystones west of Clark, and we know the vent setups in this neighborhood better than any company driving in from the suburbs. Call (833) 589-7835 and we’ll give you a straight answer before we ever step foot in the building.
Why Sandstone Chimney Sweep Is Rogers Park’s Preferred Dryer Vent Cleaning Company
We built our reputation in Chicago’s dense lakefront neighborhoods, and Rogers Park is one of the areas we know best. The housing stock here is unforgiving to anyone who treats a dryer vent like a simple pipe. Three-flats share masonry stacks. Greystones still have original clay-tile flues. Courtyard buildings hide vent terminations behind decades of additions. Our team has worked on enough of these buildings to know what we’re going to find before we open the access panel.
Norm Sobieski started Sandstone Chimney Sweep around a simple idea: the person who finds the problem should be the same person who fixes it. When our Dryer Vent Cleaning techs identify a vent routed into a dead coal flue, we don’t hand you a phone number for someone else. We quote the repair, schedule the fix, and complete it with the same crew. That single-company accountability matters in Rogers Park, where a poorly terminated vent can affect every unit in the building.
We’re not the cheapest option in 60626, and we don’t try to be. What we offer is an honest diagnosis, a camera inspection you can watch, and repairs done with materials that outlast the season.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Rogers Park
Dryer Vent Cleaning
A standard cleaning in Rogers Park runs $140 – $220, depending on vent length, accessibility, and how long it’s been since the last cleaning. We use a rotary brush system sized to your vent diameter, not a one-size-fits-all kit. In 60626, we routinely pull out 5 – 10 pounds of compacted lint from vents that haven’t been touched since the previous owner moved out. After cleaning, we run a camera through the line and show you the before and after.
Dryer Vent Installation
New vent installation in Rogers Park typically costs $350 – $700, with the range driven by whether we’re running rigid duct through a wall or re-routing around old masonry. In this neighborhood, many “installations” are actually corrections: the original vent was flexible foil, or it was jammed into a space too tight for proper airflow. We install 4-inch rigid metal duct, seal every joint, and terminate the vent on an exterior wall with a proper hood. No shortcuts through abandoned flues.
Dryer Vent Repair
Repair work in Rogers Park usually runs $180 – $450, depending on what failed. Common repairs here include disconnected sections hidden above ceilings, crushed flex pipe behind drywall, and hood dampers rusted open by lake air. We carry the fittings to fix most issues on the first visit, which matters when you’re coordinating access with tenants in a two-flat or courtyard building.
Dryer Vent Rerouting
Rerouting is the most involved job we do in 60626, and it typically runs $500 – $900. This is the fix for vents that were tied into old coal flues, shared masonry stacks, or any path that doesn’t terminate outside. We map the existing route, plan a direct path to an exterior wall, and run new rigid duct end to end. It’s invasive work, but it’s the only correct solution for a vent that’s been dumping lint into a dead chimney for 30 years.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rogers Park
We don’t stock big-box vent components. Our trucks carry DuraFlex liner systems and HeatShield resurfacing products, the same materials specified by restoration contractors and certified chimney professionals. When a Rogers Park job requires relining an old flue before we can run a vent through it, we have the components on hand. We also work with Gelco and Olympia Chimney products for terminations and caps built to handle lakefront conditions. The result is a repair that holds up to freeze-thaw cycling and wind-driven rain, not a patch that fails in two seasons.
Common Dryer Vent Cleaning Problems We See in Rogers Park Homes
- Vents tied into abandoned coal flues. Many 1900s-1930s buildings in 60626 were converted from coal to gas decades ago, and someone along the way routed the dryer vent into the dead flue. The flue was never designed for lint, and it often dead-ends behind a cap installed by a previous owner.
- Shared flues between units. In three-flats and courtyard buildings, we see dryer exhaust discharging into the same masonry stack as a neighbor’s water heater or furnace. Lint and moisture cross-contaminate, and nobody knows until a backdraft forces exhaust into a kitchen or bathroom.
- Lake-driven downdrafts. Properties east of Sheridan Road get hit with onshore wind that pushes down into any vent termination facing the lake. The result is lint backing up inside the duct and exhaust re-entering the building on windy days.
- Crushed or disconnected flex pipe. Behind the walls of older Rogers Park apartments, flexible foil duct was often squeezed into spaces too small for it. It kinks, tears, or separates entirely, and lint accumulates in the cavity instead of exiting the building.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Rogers Park, IL
Here’s what you should expect to pay in 60626. A standard cleaning for one dryer vent is $140 – $220. A cleaning plus minor repair, like a new hood or a short section of replacement duct, lands between $220 and $350. Full installation or rerouting runs $350 – $900 depending on the length of the run and the condition of the existing masonry. If your vent is tied into an abandoned coal flue, we’ll scope it first and quote the correction before any work begins. Estimates are free, and we don’t recommend work you don’t need. Call (833) 589-7835 and we’ll walk you through exactly what we’d charge for your building.
We Also Serve Cities Near Rogers Park
Our Rogers Park team works throughout 60626 and the adjacent lakefront neighborhoods. We regularly run calls to Edgewater, West Ridge, Uptown, and across the border into Evanston. If you’re in one of those areas and your building has a vent problem, we’ll bring the same camera inspection and the same straight talk to your doorstep.
Serving Rogers Park, IL — Our Local Coverage Area
We’re based in the Rogers Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Rogers Park
Yes. In many Rogers Park apartment buildings, dryer vents were routed into shared masonry stacks that also serve other units. When that happens, cleaning your vent alone won’t solve the problem because lint from neighboring units keeps migrating into the shared space. The fix is usually a dedicated vent run, which we can install. Call (833) 589-7835 and we’ll scope your building’s setup before recommending anything.
Every 12 – 18 months for most Rogers Park greystones, and more often if the vent is long, has multiple bends, or serves a household that does more than four or five loads of laundry per week. Buildings with original clay-tile flues used as vent paths may need annual cleanings regardless. Lake moisture makes lint stickier and harder to dislodge, so err on the side of more frequent service.
Clothes take longer than 45 minutes to dry, the dryer feels hot on top while running, the laundry room gets humid, or you smell a musty odor near the vent. In two-flats, you may also notice exhaust pushing back into your unit when a neighbor runs their own dryer. Any of these signs means the vent needs attention. Call (833) 589-7835 for an inspection with camera verification.
Sometimes we can clean it, but we won’t leave it as-is if it’s hazardous. An abandoned coal flue was never designed for dryer exhaust, and lint accumulates in places a standard cleaning can’t reach. We’ll camera-scope the full path and tell you honestly whether a cleaning is enough or whether the vent needs to be re-routed to a dedicated exterior termination. The re-route is usually the right call. Call (833) 589-7835 for a free assessment.
Lakefront air in Rogers Park carries more moisture, which makes lint clump and adhere to duct walls instead of blowing through. Wind-driven rain also enters terminations that face Lake Michigan, mixing with lint to form a paste that hardens over time. Buildings east of Sheridan Road need more frequent cleaning than the same building would inland. If you’re near the lake, schedule a cleaning annually.
A Note on Rogers Park’s Hidden Vent Problem
Here’s something most vent cleaning guides won’t tell you. In Rogers Park’s dense 1900s-1930s apartment buildings, dryer vents were often discharged into abandoned coal flues that are still structurally tied to shared masonry stacks. The flues were built for coal smoke, not lint. They were later capped or partially closed when the building switched to gas. Decades of lint accumulated behind those caps, trapped without any path to the exterior. The vent looks fine from the outside. Inside, it’s a fire hazard nobody has inspected since the landlord’s grandfather owned the building.
We found exactly this on a three-flat near the Howard/Clark corridor. The dryer vent had been routed into an old coal flue capped decades ago. Our tech ran a camera up the stack and found compacted lint packed against the cap, years of it. Using a DuraFlex liner kit, we ran a dedicated 4-inch vent to the exterior, cleared the accumulated lint, and restored proper draft. The building’s dryer finally vented outside instead of into a dead chimney. That’s the kind of problem you only find when you know what Rogers Park’s housing stock looks like behind the walls, and that’s the kind of problem we solve.
Written by Norm Sobieski, Owner at Sandstone Chimney Sweep, serving Rogers Park and the surrounding lakefront neighborhoods.