Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Franklin Park, IL
Chimney repair in Franklin Park usually means one thing: an older clay-tile flue that’s spalling or cracked, and a homeowner who wants to know whether it can be relined or needs full replacement. Most of the chimneys we work on here belong to 1920s – 1950s brick bungalows and two-flats, many built for coal and converted to gas decades ago. That history shapes every repair we do. Call (833) 589-7835 and we’ll walk you through what we’re seeing, with camera evidence, before anyone quotes a dollar figure.
Why Franklin Park Homes Are Different
Franklin Park sits directly under the approach path to O’Hare. Anyone who lives here knows the sound of a descending jet. What most homeowners don’t realize is that the constant, low-level vibration from air traffic works on old masonry the way freeze-thaw cycles do: slowly, season after season, until the mortar joints give up and the clay-tile liner starts to shift. We see it constantly in the bungalows off Grand Avenue and along streets like Franklin and Atlantic. A chimney that looked fine five years ago will show hairline cracks running through the tile, and the homeowner’s first clue is usually a few crumbs of terra-cotta in the firebox.
The housing stock compounds the issue. These homes were built for coal-fired furnaces. When they converted to gas, the flues stayed the same size, meaning today’s furnaces and water heaters vent into chimneys that are oversized for the job. The flue never gets hot enough to establish a strong draft, so combustion gases linger, cool, and leave behind corrosive condensation. A routine cleaning in Franklin Park frequently uncovers a liner that isn’t just dirty; it’s degrading from the inside out. Cold, wet winters push moisture into aging brick crowns, and by spring, the freeze-thaw cycle has done its work. Spalled brick, eroded mortar, liner fragments in the smoke shelf: this is what a Franklin Park chimney inspection typically finds.
Styles & brands we work with
Our Main Franklin Park Services
Two calls dominate our schedule in Franklin Park: the annual or biannual chimney sweep, and the dryer vent cleaning that too many homeowners put off for years. Both are fire-hazard work, and both are cheaper than the alternative.
Chimney Sweep in Franklin Park
A proper sweep in Franklin Park involves more than running a brush up the flue. Because so many local chimneys are clay-tile and sixty-plus years old, we’re watching for tile fragments, deteriorated mortar, and the rust debris that older dampers shed into the firebox. In the two-flats around Grand Avenue, we often find creosote buildup that’s been glazed over from years of low-temperature fires in oversized flues. The cleaning removes the fuel; the inspection tells you whether the flue is still sound. If you’re due for a sweep, read more about Chimney Sweep in Franklin Park, including what we check and what it costs.
Dryer Vent Cleaning in Franklin Park
Dryer lint is one of the most common residential fire hazards in the country, and Franklin Park’s older homes often have long, winding dryer vent runs that make the problem worse. A full load of laundry produces lint that accumulates in the vent pipe, reducing airflow, overheating the dryer, and creating a fuel source. The fix is straightforward: we clean the entire run from the dryer to the exterior termination, verify the airflow, and check the vent cap. If your dryer has been taking longer than it used to, it’s time. Learn what a cleaning involves on our Dryer Vent Cleaning in Franklin Park page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Franklin Park
Chimney repair in Franklin Park is often a relining job. The original clay tiles, sixty to ninety years old, have been through decades of coal exhaust, gas condensation, and O’Hare vibration, and they’re spalling: small pieces of tile flaking off and falling into the smoke shelf. We find cracked crowns and rusted dampers in the same chimneys. The good news is that liner replacement is now a straightforward, specification-grade job, not a mason’s demolition project. We use DuraFlex stainless liners sized to the appliance, and the work comes with a camera inspection before and after. For the full scope of what we repair, see Chimney Repair.
Chimney Cap Installation
Signs you need it
You see rusted, bird-nested, or missing caps, and the flue is open to rain, which accelerates every other chimney problem in Franklin Park’s wet winters.
What it costs in Franklin Park
Expect $250 – $550 for a standard galvanized or stainless cap installed, with copper caps running higher.
How we do it
We measure the flue opening, install a properly sized cap with a screened base to keep out animals, and secure it so O’Hare vibration won’t loosen it over time.
Chimney Liner Installation
Signs you need it
You see terra-cotta fragments in the firebox or smoke shelf, or a camera inspection shows cracked, spalled, or missing tile sections.
What it costs in Franklin Park
Stainless liner installation typically runs $1,800 – $3,200 for a single-story brick bungalow, depending on flue length and access.
How we do it
We run a camera first to confirm the existing flue dimensions, then install a DuraFlex stainless liner sized to the connected appliance, insulated where required, and verify draft with a follow-up test.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney, or the flashing has pulled away from the brick and the sealant is cracked or missing.
What it costs in Franklin Park
Flashing repair or replacement in Franklin Park generally runs $350 – $700 depending on roof pitch and the extent of the damaged material.
How we do it
We remove the old flashing, inspect the surrounding roof deck, install new copper or aluminum step flashing with proper counter-flashing, and seal the transition clean.
Chimney Crown Repair
Signs you need it
The concrete crown is cracked, spalled, or missing chunks, letting water into the brickwork and liner every time it rains.
What it costs in Franklin Park
A new poured crown costs $600 – $1,200 in Franklin Park, with smaller crack repairs sometimes less.
How we do it
We remove the failed material, form and pour a new crown with a proper drip edge to shed water away from the flue, and bond it to the existing masonry.
What Chimney Repair Costs in Franklin Park
| Item | Typical range in Franklin Park |
|---|---|
| Chimney cap installation | $250 – $550 |
| Chimney liner installation | $1,800 – $3,200 |
| Chimney flashing repair | $350 – $700 |
| Chimney crown repair | $600 – $1,200 |
Do I need a new liner or can the old one be repaired?
If the clay tile is cracked or spalled, patching doesn’t work. The liner needs replacement with a stainless system sized to the appliance. A camera inspection shows exactly what you’re dealing with before any work is approved.
How often should a chimney in Franklin Park be repaired?
Most chimneys need some repair within fifteen to twenty years of their last major work. In Franklin Park, the combination of O’Hare vibration and freeze-thaw cycles can accelerate that timeline. An annual inspection catches problems early.
Brands We Service in Franklin Park
We work with product lines that certified chimney professionals specify: DuraFlex for stainless liners, Famco and Copperfield for caps and termination components, and HeatShield for resurfacing older flues. Parts are stocked locally, so most Franklin Park repairs don’t wait on shipping. See our brands for the full portfolio.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Franklin Park, IL
| Service | Typical range in Franklin Park |
|---|---|
| Chimney sweep (standard, one flue) | $180 – $340 |
| Chimney cap installation | $250 – $550 |
| Chimney cap replacement | $260 – $520 |
| Chimney liner installation | $1,800 – $3,200 |
| Chimney flashing repair | $350 – $700 |
| Chimney crown repair | $600 – $1,200 |
| Dryer vent cleaning | $120 – $260 |
| Level 2 camera inspection | $250 – $450 |
What pushes a Franklin Park repair higher? Access is the big one. A steep roof off Atlantic Avenue, a chimney that requires scaffolding, or a two-flat where the flue runs through an interior wall all add labor. The second factor is material condition: if the crown and flashing fail at the same time as the liner, the job compounds. We quote a flat price after inspection, before any work starts, and nothing gets added mid-job without your written approval.
Neighborhoods We Serve in Franklin Park
We work throughout Franklin Park, from the bungalow streets north of Grand Avenue to the ranches and two-flats along Franklin, Atlantic, and the blocks near Mannheim Road. Our crew knows the local housing stock well enough to guess the chimney’s likely condition before we set up the ladder.
- Grand Avenue corridor
- Near Franklin and Atlantic
- North of Belmont
- Village center
- Near O’Hare boundary
Response time for Franklin Park calls is typically within a few days, faster in the late summer and early fall when our schedule opens up before burning season.
Service Area – Cities Near Franklin Park
We serve Franklin Park and the surrounding villages, including Northlake, IL, Schiller Park, IL, River Grove, IL, and Melrose Park, IL. Many of our Franklin Park customers also own two-flats or rental properties in these neighboring towns, and we’re happy to coordinate multiple jobs in a single visit.
Serving Franklin Park, IL — Our Local Coverage Area
We’re based in the Franklin Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Franklin Park
Most Franklin Park repair calls are scheduled within three to five business days. In late summer and early fall, before the burning season starts, we can often get out sooner. Emergency repairs after a storm or major leak get priority in the schedule when we can manage it.
Most routine repairs like caps, flashing, and liner installation don’t require a standalone permit, but structural masonry work sometimes does. We’re familiar with the village’s expectations and will flag anything that needs paperwork before the work begins, not after.
Yes, the whole village, including 60131. We cover the bungalows off Grand Avenue, the streets around Franklin and Atlantic, the manufacturing corridor near Mannheim, and everything in between. If you’re in Franklin Park, you’re in our service area.
We find it, we fix it. If your chimney needs a sweep, a camera inspection, or a liner replacement, call (833) 589-7835 for a free estimate. We’ll show you the photos, explain what actually matters, and give you a price before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Franklin Park Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Priya Patel"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Shannon Miller"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Marisol Martinez