Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Irving Park, IL
Chimney repair in Irving Park, IL typically costs $350 – $1,900 depending on whether you need a crown rebuilt, a liner installed, or flashing replaced. Most Irving Park homes we service were built between 1900 and 1930, which means unlined or clay-tile-lined interior masonry chimneys that have endured a century of Chicago freeze-thaw cycles. That’s a very different job from working on newer construction, and it’s why we approach every Irving Park chimney as a system worth evaluating properly before recommending work. Call (833) 589-7835 for a free estimate.
Why Irving Park Homes Are Different
Irving Park is a North Side neighborhood of late-19th to early-20th-century worker’s cottages, two- and three-flats, and brick bungalows packed onto tight 25-foot lots along the Milwaukee Avenue corridor. Many of these homes have original interior masonry chimneys that were never lined for modern use, and now those flues compete for space with later furnace and water-heater vents. The result is a chimney system that has been patched, repointed, and adapted over decades rather than built to a single standard.
The climate here doesn’t do old masonry any favors. Cold, snowy winters with repeated freeze-thaw cycles drive spalling of exterior brick and crown cracking. Summer thunderstorm downdrafts and Irving Park’s dense tree canopy drop debris that clogs caps and screens. Technicians working on the tight gangways between two-flats routinely find that a chimney shares a wall with a neighbor’s and that flue tiles have been rebuilt piecemeal, so a camera inspection often reveals mismatched liners and offsets from earlier partial repairs. Chimney work in Irving Park is less about new construction and more about evaluating and re-lining aging 1920s-era flues in dense, owner-occupied two-flat and bungalow stock. Sandstone Chimney Sweep has served Irving Park since 2017.
Styles & brands we work with
Our Main Irving Park Services
Irving Park homeowners call us most often for two things: a thorough chimney sweep before burning season and dryer vent cleaning to address lint buildup in older laundry setups. Here’s what each involves in this neighborhood.
Chimney Sweep in Irving Park
A proper sweep in Irving Park starts with understanding what you’re actually burning in. Many of these older homes were converted from coal to gas decades ago, and the flue wasn’t always upgraded to match. We remove creosote and debris, inspect the flue with a camera, and check that caps and screens are clear of the leaves and twigs that Irving Park’s tree-lined streets drop onto rooftops. If we find cracks, missing tiles, or a liner that was never right for the job, we show you the footage and explain what can wait and what can’t. See Chimney Sweep in Irving Park for full details.
Dryer Vent Cleaning in Irving Park
Lint-clogged dryer vents are one of the most overlooked household fire risks, and in Irving Park’s older two-flats and bungalows, dryer vents often run long distances through finished walls or shared chases. That makes them hard to access and easy to ignore. We clean the full run, check for crushed or disconnected sections, and confirm the termination is clear. Many customers combine this with a chimney sweep so both fire hazards are addressed in one trip. See Dryer Vent Cleaning in Irving Park for full details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Irving Park
Chimney repair in Irving Park is typically $350 – $1,900, and the most common drivers are freeze-thaw damage to crowns, rusted flashing, and flue tiles that were never upgraded from the original coal-era construction. Homes in Irving Park built between 1900 and 1930 often have unlined or clay-tile-lined interior masonry chimneys that show their age through spalling brick, cracked mortar joints, and offsets from decades of partial repointing. Since we stock specification-grade liner and resurfacing systems from brands like DuraFlex and HeatShield, the same team that diagnoses the problem can repair it without sending you to a subcontractor. We find it, we fix it. If you’d like to understand the full scope of what we handle, see Chimney Repair.
Chimney Cap Installation
Signs you need it
You see rust flakes around the top of the chimney, notice water staining on the ceiling near the flue, or have had animals nesting in the flue.
What it costs in Irving Park
Chimney cap installation in Irving Park typically runs $250 – $550, depending on flue size and whether the crown needs prep work first.
How we do it
We measure the flue opening, fit a cap matched to the flue dimensions, and secure it to a sound crown so it sheds rain and keeps out Irving Park’s tree debris.
Chimney Liner Installation
Signs you need it
Your clay tiles are cracked, you see gaps or offset sections on a camera inspection, or the home was converted from coal to gas without a liner upgrade.
What it costs in Irving Park
Chimney liner installation in Irving Park varies widely by height and access, but most jobs fall in the $1,200 – $2,000 range before any masonry prep.
How we do it
We measure the full flue run, select the correct DuraFlex liner system, and install it through the existing masonry from roof or roofline access, then verify the connection at the appliance.
What Chimney Repair Costs in Irving Park
| Item | Typical range in Irving Park |
|---|---|
| Chimney cap installation | $250 – $550 |
| Crown repair | $450 – $1,100 |
| Flashing replacement | $450 – $1,200 |
Two things push prices up in Irving Park: access through narrow gangways that requires extra setup time, and the condition of the surrounding masonry, which often needs repointing before a liner or cap can be installed correctly. We give you a flat-price quote before work begins, so the number we agree on is the number you pay.
Do I need to reline my chimney if I only burn occasionally?
Yes, if the existing liner is cracked or missing. Occasional fires still produce heat and gases that can escape through damaged flue tiles and find wood framing. A camera inspection tells you definitively, and we only recommend relining when the footage shows a real problem you can see for yourself.
My neighbor and I share a chimney wall. Can you still repair my side?
Usually, yes. Irving Park’s two-flats often have chimneys on a shared party wall, and we handle one side at a time as long as we have safe roof access. Shared masonry means we’ll inspect the full structure, but repairs to your flue and cap can proceed independently.
Brands We Service in Irving Park
We work with specification-grade product lines including DuraFlex, HeatShield, Famco, and Copperfield, the same materials specified by certified chimney professionals and restoration contractors. Because we stock these systems locally, most repair parts are on the truck when we arrive, which keeps Irving Park repairs moving without waiting on big-box substitutes. To see the full portfolio we service, visit our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Irving Park, IL
| Service | Typical range in Irving Park |
|---|---|
| Chimney sweep | $195 – $340 |
| Chimney cap installation | $250 – $550 |
| Crown repair | $450 – $1,100 |
| Flashing replacement | $450 – $1,200 |
| Chimney liner installation | $1,200 – $2,000 |
| Dryer vent cleaning | $145 – $250 |
In Irving Park, the biggest price drivers are flue height on two- and three-flats, gangway access that limits setup space, and whether the crown or surrounding brick needs prep before the main repair. Every quote is a flat price agreed before we start, so there’s no meter running and no surprise line item at the end.
Neighborhoods We Serve in Irving Park
We cover the full 60641 ZIP and the surrounding blocks, from the bungalow-lined streets west of the Kennedy to the two-flats east toward the river. Chimney access differs block by block here, which is why our quotes account for gangway width and roof pitch. Most Irving Park jobs can be scheduled within the same week, and we’ll give you a specific arrival window when you book.
- The Villa
- Old Irving Park
- Independence Park
- Kilbourn Park
- Avondale border blocks
Service Area – Cities Near Irving Park
We also serve nearby neighborhoods including Belmont Cragin, IL, Portage Park, IL, Avondale, IL, and Logan Square, IL. If you’re a few blocks outside Irving Park proper, call anyway and we’ll confirm coverage.
Serving Irving Park, IL — Our Local Coverage Area
We’re based in the Irving Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Irving Park
Most sweeps and estimates can be scheduled within the same week, and we give you a specific arrival window when you book. During burning season, autumn and early winter, we recommend calling a few weeks ahead if you want the flue ready before the first fire.
Most routine repairs like caps, crowns, and flashing don’t require a permit in Chicago. Liner replacement sometimes triggers a permit depending on scope, and we’ll tell you before work begins if your job needs one, so there’s no risk of an unpermitted surprise later.
Yes, we handle narrow gangway access regularly. It sometimes adds setup time, which we factor into the quote. What matters more is whether the chimney shares a party wall with the neighboring building, and we’ll inspect that before recommending any repair approach.
If your Irving Park chimney needs an honest look, call Sandstone Chimney Sweep at (833) 589-7835 for a free estimate. We’ll answer your questions, show you what the camera sees, and only recommend work that actually needs doing.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Park Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Angela Wong"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Priya Patel"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Shannon Miller